1 / 2
Kinochrome 110 film holder for DSLR scanning
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick prototype for a 110 film holder to elevate the film when scanning with a DSLR. Model parts snap into place.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 145
- Wydruki
- 1
- Wyświetlenia
- 672
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (15)Powiązane
Quick prototype for a 110 film holder to elevate the film when scanning with a DSLR. Model parts should snap into place.
Tested on a Prusa Mini using 0.15mm nozzle under SPEED settings in Prusa Slicer with a 20% infill
If you want this but don't have a 3D printer please reach out! https://kinochromestudio.com