Solderpipe with gear
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easier way to use the solderpipe, makes it easier to dispense solder.
- Ocena
- 4 / 5
- Polubienia
- 8
- Pobrania
- 43
- Wydruki
- 2
- Wyświetlenia
- 755
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This is a work in progress
So I made this model, to try to improve the solderpipe. I thought the solderpipe was a great idea, but it was just to hard to dispense the solder.
For me this remix works quite well but it has some flaws. I plan on doing a complete redesign, but I would like some feedback. So if you don't have anything to print, please print this and tell me how its working for you.
I use 0.8mm solder, but different thicknesses will probably also work, because the tolerance is quite tight for my 0.8. If it needs to be bigger/smaller you could also scale the gear a bit up or down in you slicer.
You need one skate bearing (608) to complete this model. I will also add a no bearing version in the future.
I added a version with custom supports in the arch at the bottom. That version prints without supports.
The rest of the parts of this model are the same as the original model.