1 / 10
Holder for WLtoys 1:28 cars — zdjęcie 1
1 / 10

Holder for WLtoys 1:28 cars

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holder for WLtoys 1:28 cars

Ocena
0 / 5
Polubienia
13
Pobrania
16
Wydruki
0
Wyświetlenia
786
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Share Alike

Holder for WLtoys 1:28 cars that grabs on to the chassis plate of the car.

Push the slider in to open the clamps and unlock the car.

There are two mounting holes for M3 cylinder head screws.

you need:

  • 8x M2 Nut
  • 8x M2x6
  • 1x Ext. 3/16"x1-3/4" Spring (cut in 2 halfs)

Assembly:

  • Halve the tension spring in the middle and form new eyelets. Adjust the spring length so that the spring is still slightly tensioned even with the smallest slider distance!
  • Place slider in cover. (possibly lubricate with petroleum gelly)
  • Pull the eyelets of the tension spring over the pins of the clamps and place them on the slider.
  • Fix the whole thing with the holder and screw it together with M2x6.
  • Holders (L/R 1-3) can be glued into position with 1.75mm filament using the holes.

Tagi