12V DC Distribution Box 5521 Barrel Jack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was tired of using cheap CCTV camera power splitters to run my astronomy gear, so this box does the trick nicely.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 720
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
Not as fancy as a Pegasus Astro Powerbox, but works great just for providing enough DC jacks to power gear. Can technically be daisy-chained.
Working on a V2 with individual circuit relays and possibly a dew heater controller.
Made to fit this: https://www.amazon.com/OONO-Position-Terminal-Distribution-Module/dp/B08TBXQ7H6
And I used these for the jacks themselves: https://www.amazon.com/gp/product/B09H5L3KN5 but anything similar would probably work.
In my case, I used two PG7 cable glands on each end to feed wires through, but mix and match to your liking.
Feel free to modify https://www.tinkercad.com/things/7lUsd6MLZ3n-stunning-turing
4xM3 screws hold the lid on (6-10mm length should work fine)