Box for Teng Tools Spline bit XZN 12
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple box for Teng Tools Spline bit XZN-12 You will need two M3x20 bolts for the hinges and superglue for the tab
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 382
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I crafted a containment unit for the elusive TengTools Spline Bit XZN-12 (measuring 12mm x 100mm) to thwart its vanishing acts, ensuring it doesn't pull a Houdini on me.
You will need two M3x20 bolts for the hinges and superglue for the lock tab.
Prints fine without supports.
Material:
Print the lock tab in PETG because it needs to flex a bit. It might work in PLA as well if you grind down that “hook” a bit.
How to print dual color first layer:
Layer height: 0.16mm
Enable Z-hop: 0.6mm (because the text is 0.16x3=0.48mm thick)
Brim: No
- In your slicer - add the text to the print bed and print it in black. Don't remove it after it's finished - leave it on the bed and make sure the bed stays hot.
- Import the “Top with recessed text” into your slicer and align it perfectly on top of the text. Now - remove the text from the slicer. Print.
Let the bed cool down before removing the top and text, or it might separate from each other.
Dual color first layer for Bambu users.
I have added a “top with embossed text” so it should be paintable in your slicer. The text is embossed 0.0001mm.