Meowser EX BCAR
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modified EX BCAR that attaches to the OFD Meowser
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 776
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
NEW UPDATE
Added a revision 2. This uses the threading from the rev 2 EX BCAR, so you can thread on any BCAR size/twist you want. Files and assembly/print instructions for the BCAR itself can be found here
https://www.printables.com/model/781291-rev-2-ex-bcar/files
Revision 1 is still in the files. It may offer better performance for low-power builds since there is less dead space in the barrel. It uses 8 degree twist so this one is best for 120fps or lower
HARDWARE:
9x F683ZZ flanged bearings.
9x m3x10 button head screws.
BUILD:
Make sure to print with the large plate down. Supports are not required. print at 0.2mm layer height.
pop the bearings into the holes with the flange facing the screw heads.
secure the bearings with the m3 screws.