Lazy, all-in-one Prusament PETG gcode for Nevermore v6 fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made a Nevermore v6 fan/filter for my Prusa Enclosure, but in the process, made a simple, easy to print gcode for MK4 IS
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 1472
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Just made a one-and-done gcode for lazy people like me who want a Nevermore v6 enclosure fan. Parts you'll have to provide are 2x 2 pin WAGO 221 lever connectors, 2x 5015 blower fans, 2x M3*4*5 heat set inserts, M3 screws (forgot the length. 6mm?), and 8x 6x3 magnets. And some super glue for the magnets. Assembly instructions at the original link, but it's pretty straightforward.
Now, I was able to get the jalousie lid to print, but it just wasn't a great experience, so I used the straight door mod. I wanted simple and easy, so this is what it is.
Larger pieces print with a brim to just prevent any lifting off the plate; probably not fully needed, but again, I'm lazy and I would only want to print this once. I printed this in the enclosure, doors closed, and it held a temp of 30c internally during the print, leading to overall rather decent print results with Prusament Galaxy Black. Also, printed on Satin plate cause that's generally the easy-mode print surface for nearly everything on a MK4.
If you're needing a power supply to run the fans, and all of your other 24v accessories that you don't want to put on the Prusa original power supply, check out a Meanwell LRS-100-24 and this super nifty, easy, print in place power supply case I made: LRS-100 Case (Includes mounting point for Hf105f-4 24VDC relay) by OldKingHamlet | Download free STL model | Printables.com