200mm Caliper Gridfinity 3 x 8
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3 x 8 Gridfinity for 200mm digital callipers
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 198
- Wydruki
- 0
- Wyświetlenia
- 1035
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Couldn't find a gridfinity bin that displays the caliper this way for a 200mm caliper, so I tried my best at making one.
Caliper is a cheap, generic one from Amazon AU, have seen similar ones on AliExpress and eBay. Has a little coin battery spot (holds 3 batteries I believe).
Item is printed on two plates. No pegs were added as I didnt see the need for them. They sit fairly flush once placed in the Gridfinity baseplate.
Not 100% pleased (thumb holes don't sit flush with the base), but I couldnt figure out how to get that done on Fusion360.
Hopefully this will help at least someone out there!