1 / 2
3-pin JST-XH Splitter by Shammy Mount (DIN or Extrusion) — zdjęcie 1
1 / 2

3-pin JST-XH Splitter by Shammy Mount (DIN or Extrusion)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The awesome 3 pin JST-XH splitter by Shammy is great for cleaning up wiring. This model lets you mount it easily!

Ocena
0 / 5
Polubienia
8
Pobrania
62
Wydruki
0
Wyświetlenia
614
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

I recently bought this awesome 3-pin JST-XH splitter PCB from Shammy over at XR Bunker, but I needed a way to mount it.

Given this was destined for my Voron 2.4, I designed a simple mount that can be used with either the stock Voron 2.4 DIN rail clip or roll-in T-nuts depending on mounting location!

For the DIN rail mount, you will need:

  • 1x DIN clip from the V2 repo
  • 2x “Voron BOM” M3 Threaded Inserts (M3x5x4)
  • 2x “Voron BOM” M2x10 Self-tapping screws
  • 2x “Voron BOM” M3x6 BHCS screws

For the extrusion mount, you will need:

  • 2x “Voron BOM” M3 Post-install T-nuts
  • 2x “Voron BOM” M3x12 BHCS screws
  • 2x “Voron BOM” M3 Threaded Inserts (M3x5x4) (optional, but recommended to center the screws in the holes)

Tagi