Johnsonville Sizzling Sausage Grill BTG0500 Grease Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lose your grease tray? Try this one. Note: I have NOT fit tested this but it is measured/modeled from existing component
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 272
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This was a request from a user; I have NOT tested this for size; the model is based on my tray part and is close to within a 0.2mm or so, but all sizes are based on the top of the tray and the model was not created with a draft (as was the original part). Since this is untested I've loaded up the original Fusion model as well as two versions of the file as a STEP 3D model - one with a bunch of filleted edges (as manufactured), and one prior to filleting should you need to adjust the size to make yours fit.
IMHO, this is a questionable print as it's going to see hot (100C) grease and most FDM is unwashable. Perhaps a resin print using a high HDT resin would be the best option. Regardless, I hope this helps out anyone who has lost their tray and wants to try printing up a replacement. Cheers!