FPV Racing Drone
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printable fuselage, arms and cover for an FPV racing drone designed for Selective Laser Sintering (SLS).
- Ocena
- 0 / 5
- Polubienia
- 46
- Pobrania
- 267
- Wydruki
- 0
- Wyświetlenia
- 2267
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
One of our engineers is an aeromodelling enthusiast and has been working on his own FPV racing drone for quite some time. After many hours of designing and testing, the latest version performed quite well in the field.
The arms are detachable from the fuselage and therefore can be quickly replaced after a hard crash (as you can see in the video).
Outdoor Fly Test: https://www.youtube.com/watch?v=zMZQ3P21NdM
Design & 3D Printing: https://www.youtube.com/watch?v=gPYZUTjL_0A
Additional Components used
- 1x Flycolor X-Tower F4 Flight Controller OSD + 40A BLHeli_32
- 4x Emax RS2205-2300 2205 2300KV Racing Edition CW/CCW Motor
- 1x Runcam Micro Swift 3 V2
- 1x PandaRC VT5804M V2 0-600mW Switchable 48CH FPV Transmitter VTX
- 1x PandaRC MMCX to SMA/RP-SMA Female Adapter Connector Cable 70mm for PandaRC VT5804
- 1x Aomway RHCP 3dBi 60mm Short Antenna Clover-leaf
- 2x DALPROP Q4045 - 4x4.5 - CW
- 2x DALPROP Q4045 - 4x4.5 - CCW
- RC-Receiver
Category: R/C Vehicles