Android Robot Snowman
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another variant of Android Robot Head need support for the nose (use Touching Buildplate support). I suggest to print…
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 677
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
Another variant of Android Robot
- Head need support for the nose (use Touching Buildplate support). I suggest to print it with 0.15 mm layer height.
Body print upside-down. I don't think support will be needed. I suggest to print it with 0.2 mm layer height. The other parts you can take from the Remix Source (including print settings for them):
https://www.prusaprinters.org/prints/84053
https://www.thingiverse.com/thing:3300473
1 x head ring
- 1 x pair of eyes
- 2 x arm pin
- 2 x shoulder pin
- 2 x arm
2 x hand (use any combination of hands with fingers/hole or more options from here: https://www.thingiverse.com/thing:525796) Detailed assemble instructions you can find in remix sources mentioned above.
I haven't printed this variant yet. Will be happy to see your prints.
Any comments/suggestions are welcome.
Category: Toy & Game Accessories