Spice Rack for cabinet or wall
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spice rack for cabinet door or wall. Can be scaled up/down to fit most round spice containers. Spices easily snap in.
- Ocena
- 4,6 / 5
- Polubienia
- 107
- Pobrania
- 339
- Wydruki
- 4
- Wyświetlenia
- 2608
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
Spice rack for cabinet door or wall. Has a good amount of spring to it. I have printed it out of PETG and PLA with no real issues. Only 3 or 4 screws need installed, but plenty of holes for different arrangements. I only used 4 #8x3/4 screws. If metric I would use 4mm.
UPDATE: I have added two more versions (x4 and x6) for smaller printers. Also I took some measurements of our spices. We have containers that range from 42mm up to 47mm. All are held very well and secure. I hope this information helps when determining if it will work for you or need some scaling.