AA Battery Case - Holder for Spare Batteries
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple container to hold spare AA batteries.
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 259
- Wydruki
- 4
- Wyświetlenia
- 1235
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Public Domain
Sometimes it is useful to carry spare batteries with an electronic device, in case the installed batteries run down. However, just throwing loose batteries into a bag, pocket, purse, or whatever can be risky, as the batteries might leak, or they might short out against keys or some other metal.
These simple containers are designed to hold 1, 2, 3, or 4 AA size batteries - just pick the case for the number of batteries you want to keep on hand. Each “case” consists of a bottom and top piece, which simply telescope together with a snap fit. “Dimples” on the container make sure the batteries don't rattle around, and also serve to “snap” the two pieces together.
Print Instructions
Print in PLA using the 3mf or gcode files provided. The filenames indicate the number of batteries for each “set” (top and bottom).
Important : The prints are designed to print in vase mode with 0.3mm layer height. Make sure the print is oriented on the print bed with the “dimple end” up.
CAD
The OnShape 3D CAD files for this are here: