Worx Pegasus Clamping Support Plates
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easily clamp to the edge of the table.
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 150
- Wydruki
- 9
- Wyświetlenia
- 807
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Worx Pegasus is a great little folding work table. Due to the design, it is difficult to clamp to the bottom edge of the table. You can use a scrap piece of lumber but then you have to hold it underneath while trying to get everything lined up and clamped. It's a pain.
These thin plates attach to the bottom using #6 x ½" sheet metal screws. I have used them several times now and it makes life much easier.
Print four copies of the long edge plate and 2 copies each of the rest of the plates.
I purchased my Pegasus table in Oct 2023 so hopefully it has the same underside design as earlier versions.