Milwaukee M18 Triple Tool Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of Bendy's Remix, extended to fit 3 tools on one print.
- Ocena
- 0 / 5
- Polubienia
- 42
- Pobrania
- 397
- Wydruki
- 0
- Wyświetlenia
- 1127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I liked the simplicity of Bendy's model, but I wanted something to match the triple battery holder I printed.
This does just that; keeps original design, just duplicated the model twice and combined all bodies. Also removed some holes that were not needed.
4 - #8 wood screws in the corners, and 1 in the center just in case you have a heavy tool on there; I've hung the full size ½" drive impact, a grinder, and a drill and it held up well.
This will not fit drills with tool clips, or a Circular Saw. Will hold an M18 Grinder, but I recommend the tool hook I found ( https://www.printables.com/model/309184-milwaukee-m18-grinder-mount ) instead of having it stick out/up towards your workspace.
Printed in PLA seen here.
PETG or ABS will work better if you need the weather resistance - My equipment is in a shop, so not really needed.
PRINT THIS UPRIGHT FOR BETTER STRENGTH. No supports needed if you print upright - otherwise natural supports are best for removal if you print it flat. Less strength due to layers if you print this flat.