Suzuki Jimny Center Console
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a center console with cup holder for Suzuki Jimny Vehicles.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 137
- Wydruki
- 0
- Wyświetlenia
- 1635
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This model was made using an existing cup holder as reference and tested on a JA11. The divots on the bottom are meant to allow the console to sit flat as their are small ridges where it is meant to be installed. This model is not for commercial use in any capacity. I made it for free to support the community.
The model can be printed whole or it can be printed in two half's and then joined afterwards. The Console Rear model can be used on its own if you only desire the cup holder.
As always feel free to make changes to the model if needed to accommodate your needs.