Water Bottle Cup Holder Adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I got a new water bottle, the bottle is too loose in the cup holder, lets fix it.
- Ocena
- 3 / 5
- Polubienia
- 5
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 532
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
I bought a new water bottle, it wiggles in the cup holder. I don't like the sound of things rattling in the car, so I made an adaptor. I came up with the idea this morning, and when I got home from work, I started working on it at 7:07pm. I started the printer at 7:40pm. It will run for less than 3 hours with no concern of it breaking off the table.
Please note the gcode I use is actually in the .txt section. Both Gcode and Txt will work. The only difference is a clean nozzle pause in the txt. Unfortunately PrusaPrinters doesn't allow me to upload unless I comment out the pause.
Car: 2016 Honda Pilot EX-L
Bottle: Contigo Jackson Reusable 24oz
Material Used: Anthracite Grey Prusament
There are 2 song segments in the program. Megalovania for nozzle tip cleaning and Mario Coin for the End of Run