GearHead Quest 3 Strap Bambu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reupload of original stl in 3mf format for Bambu/Orca slicers Added built model, may help someone to choose colors
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 238
- Wydruki
- 1
- Wyświetlenia
- 2210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Share Alike
Reupload of original made by Adam & Evil. 3mf format for Bambu/Orca slicers
Added assembled plate (not printable!), may help someone to choose colors of your print
Also can help someone to assemble entire strap.
Added tolerance calibration plate
Original model designed for printing in PLA/PLA+
I've printed in PETG on X1 Carbon and that's fit fine
No supports or metal screws needed.
Some models are pre-supported
Original printed in 15% infill
I've designed for 10% infill in gyroid, that's a bit lighter but still enough strong
My thanks to author of original model for great project
Weight:
- All gears and movable back panel: 127.61g
- Strap and hair-protector: 154.97g
- Covers and quest3-holder: 76.64g
Total: 359,22
You can experiment with different settings for more light-weight print
All strap fits nice, maybe back-panel need some sanding
WARNING.
MainFrame plate can display warning about supports, just ignore it
It's prints fine