Pin Header Snapping Tool - Single Row - 2.54mm Pitch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimal, tiny, laser cut tool for cleanly snapping single row, 2.54mm pitch header pins into desired lengths.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 98
- Wydruki
- 0
- Wyświetlenia
- 1416
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Inspired by several similar tools, I wanted to create my own, using laser cut acrylic. Works with any break-away, single row, 2.54mm male header pins, regardless of length, even right-angle headers.
Inspiration:
- Break-Away Header Pin Snapper Tool by Proto-Pic
- RedSnapper - The Compact and Precise Pin Header Adjustment Tool - 2.54mm Pitch by phenoptix
- Pin Header Break Away Tool by arturo182
The whole thing took only a few minutes to design in Fusion360, even less to cut and assemble.
The three pieces are assembled together using M2 screws. I screwed them in from the bottom so that I could use this with even right-angle headers.
I'm sure it could be 3D printed, but I haven't tried it, and you might need to adjust the dimensions to suit your printer's tolerance.
I've included DXF files for laser cutting, STL files for 3D printing (although I haven't extruded/embossed the marks or numbers), and the Fusion360 file. The f3d file is parameterized, so hopefully adjusting for tolerance should be easy.