Tascam Portacapture X8 case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As the proud owner of a new to me Tascam Portacapture X8, I really wanted a case for it. But for some wild reason,…
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 87
- Wydruki
- 2
- Wyświetlenia
- 473
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
As the proud owner of a new to me Tascam Portacapture X8, I really wanted a case for it. But for some wild reason, there are very few dedicated examples on the market that protect this rather fragile piece of gear. I quite liked how the Zoom H4n came with that blow molded case, though disliked its live hinge.
Here's my take on it. Two cases are posted.
- XY orientation
- no mics
Both will lay flat when opened! No weird tipping over issues here folks.
Prints with no support needed. Orient the print flat side touching the build plate.
The case makes use of a filament hinge. YMMV on how well it works for you, but I use a length of PETG and I have had no issues.
The devices to center the recorder in the case do abrade the black plastic of the recorder a bit. I'm sure over time it'll end up creating some worn shiny surfaces on the X8. If that scares you, do use a bit of thin gaffers tape or something to cover up those surfaces on the case.
See the youtube vid for how it looks like in use.
XY mics https://youtu.be/flh56wqFlqo
No mics https://youtu.be/XZTd__aazo8
Category: Audio