Hip Flask
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
print in place hip flask
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 281
- Wydruki
- 2
- Wyświetlenia
- 1154
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
Print in place hip flask. fully printable in upright position. I added a logo to mine if you do so increase shell thickness so walls are solid. if you don't do that the slicing software sees the logo as part of the wall and your flask my not be water tight i increased to 1.5mm and had no problems. also increase resolution and infill density for best results.
also i added an o ring to cap
print flask cap with thread hole facing up for best results
keep in mind not all printer have the same tolerance when printing thread. the thread on said model is set for my Anycubic Kobra printer. i added various files so feel free to edit if needed.
cap design is a little blah ill redesign and post asap