CR-10 Palette+ PTFE Lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Doing a full Palette+/CR-10 integration and I needed this part to lock my shortened and spliced Palette tube to the…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 171
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Doing a full Palette+/CR-10 integration and I needed this part to lock my shortened and spliced Palette tube to the chassis of my CR-10. Used in conjunction with https://www.thingiverse.com/thing:2418632 by Skulker, where I outline some of my plans in their comments.
If you plan on following this idea, to splice the PTFE tube, you just need a flexi straw. In my experience, it fits the outer diameter of the Palette's PTFE perfectly. You could also probably use some really thick heat shrink. The stuff with the heat-activated glue, probably.
Category: 3D Printer Accessories