1 / 4
fan adapter 6015 for chargery power S1500 — zdjęcie 1
1 / 4

fan adapter 6015 for chargery power S1500

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

chargery power supply S1500 60A version 2.1

Ocena
0 / 5
Polubienia
3
Pobrania
14
Wydruki
0
Wyświetlenia
172
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

"Fan adapter 6015" for Chargery Power S1500 model building power supply unit

A fan (D-FAN DFH6010S 60x60x10mm) broke on my power supply unit.

A suitable fan that had a little more airflow was one that was 5mm thicker than the original fan. So I bought two new fans (Sunon MF60151V1 60x60x15mm). However, an adapter plate had to be designed so that the fans would fit.

I won't go into more detail for the rest of the installation, as this is at your own risk. Perhaps someone else may need this adapter plate.

Have fun printing.

**************************************************************************

"Lüfter-Adapter 6015" für Chargery Power S1500 Modellbau-Schaltnetzteil

Bei meinem Netzteil ist ein Lüfter (D-FAN DFH6010S 60x60x10mm) kaputt gegangen.

Ein geeigneter Lüfter, der etwas mehr Luftdurchlass hat, war einer der 5mm dicker war, als der original Lüfter. Ich kaufte mir also zwei neue Lüfter (Sunon MF60151V1 60x60x15mm). Es musste jedoch eine Adapterplatte entworfen werden, damit die Lüfter hineinpassen.

Für den weiteren Einbau gehe ich nicht genauer darauf ein, da dies auf eigene Gefahr geschieht. Vielleicht kann diese Adapterplatte noch jemand benötigen.

Viel Spass beim Drucken.

Tagi