Centrifuge / Coffee Storage / Single Dosing Tube Funnel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small funnel - perfectly sized for 50ml centrifuge tube, commonly used for storage of coffee doses.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 108
- Wydruki
- 2
- Wyświetlenia
- 560
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed this funnel for used 50ml centrifuge tubes that have become ubiquitous in the specialty coffee community. Tolerances are not tight so you should not need to worry about resizing. (External diameter of tip of funnel is about 25.5mm)
Printed with PLA but PETG is generally considered better for food safety. I am not worried in this case as coffee beans are dry, not particularly small and do not touch the funnel for very long at all - but please do your own research on the food safety of 3D prints if using this in a commercial setting etc.
0.24mm layer height (I think) on 0.6mm nozzle but most combinations should work fine.