Coffee Hand Grinder Funnel (42mm diameter - designed for 1ZPresso Q series)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Funnel to make loading coffee easier. Designed for 1ZPresso but may work on others - approx 42mm ext. diameter at tip.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 282
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed for my 1ZPresso Q2S but may work on other grinders. The tip of the funnel is approx. 42mm external diameter so if your grinder is larger you might be in luck.
Height from narrowest point of cone to tip of funnel externally is approx 12mm, which been a good amount to sit inside the grinder for me.
Can be printed with PLA but PETG is generally considered better for food safety. I am not worried in this case as coffee beans are dry, not particularly small and do not touch the funnel for very long at all - but please do your own research on the food safety of 3D prints if using this in a commercial setting etc.
0.24mm layer height (I think) on 0.6mm nozzle but most combinations should work fine.