ultraslim nespresso capsule holder - 4 capsules
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
designed to put on my nespresso essenza mini lateral wall, taking as little space as possible
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 60
- Wydruki
- 1
- Wyświetlenia
- 196
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
designed to put on my nespresso essenza mini lateral wall, taking as little space as possible. total height is 6mm. the back wall is 1.5mm high. you may "sink" the model 1mm into the hotbed, if you want it even thinner (that's what I did, actually)
it holds 4 capsules. it's easy to put in place with some double side adhesive tape.
you may print several and put them side by side.
mine is PETG, but PLA, ABS and even TPU should work fine
you may print without supports, even with the hanging parts
please, share it if you print it!
hope it helps someone :)