CR-10/s Z Gantry Bracing Fasteners
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fastener kit for AzViper's Z Gantry Brace. Should also be semi-compatible with WickedFog's original creation. Print; 8…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 247
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Fastener kit for AzViper's Z Gantry Brace. Should also be semi-compatible with WickedFog's original creation.
Print;
8 x "screw"
4 x "shoulderscrew"
2 x "lefthandrodend"
2 x "righthandrodend"
Combine these with any of the 2020 slot anchors already on the 'verse that's compatible with the included M5 x 14mm screws here, and you can put this brace together a lot cheaper than if you have to buy the (insanely priced) fasteners for it..
You'll also need;
2 x 12mm OD x 10mm ID x 500mm carbon fiber tubes: https://alofthobbies.com/carbon-fiber-tubes-500mm-lengths.html
This should go without saying, but obviously these plastic fasteners are not going to be as strong as metal (Depending on the material). So don't reef on them, break them, then blame it on me. Theses no reason this system needs to be any more than finger tight to function.
Category: 3D Printer Parts