1 / 6
D&D Prop Ship - Painted, Large-Format
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple large prop ship for tabletop gaming, sized for miniatures, painted in two colors.
- Ocena
- 0 / 5
- Polubienia
- 346
- Pobrania
- 1463
- Wydruki
- 0
- Wyświetlenia
- 6196
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props & Terrains
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 4)Remiksy (0)Kolekcje (539)Powiązane
MarcMartin3dnd over in Thingiverse published this excellent model, based on the sample map in the 5e Dungeon Master's Guide.
This is a version of this model optimized for the Prusa XL, specifically:
- It's made of two huge parts (that barely fit on the build plate) instead of 6, for convenience.
- It uses two colors.
The main downsides, compared to printing 6 individual parts:
- The top part needs a lot of on-build-plate supports, but I think it's worth it for the convenience. After some trial-and-error, I recommend just going for standard/snug - NOT organic or tree.
- The top and bottom parts don't fit each other perfectly, some manipulation would be needed such as sanding the connectors.
Printing instructions:
- The bottom part doesn't need supports.
- The top parts need supports on build plate + on the existing paint-on supports, mostly on some parts of the railing and on the pin holding the wheel.
- Some of the accessories are very small and delicate, a brim is highly recommended for these.