Motley v3 510 collar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After putting a Motley v3 510 on my mod, I realized I really didn't like the stock collar. So I measured it out and…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
After putting a Motley v3 510 on my mod, I realized I really didn't like the stock collar. So I measured it out and made my own. This is the result. Scaled 1.05 larger than stock to account for some PLA shrinkage. Enjoy and feel free to remix~.
--
"Fire Girl Collar" was designed for box mods that have at least 50mm of length off the center of the 510 with the vents in an "X" pattern. Shorter than 50mm and it will overhang. Can be printed well with as much as a 0.5mm nozzle with FDM printers
"Fire Girl Collar Small" was designed for box mods that have at least 40mm of length off the center of the 510 with the vents in an "X" pattern. Shorter than 40mm and it will overhang. A 0.4mm nozzle would probably work best for this print with FDM printers
"Iron Cross Collar" was inspired by a friend of mine who is a U.S. Marine with a great love of German tanks. It fits in the same area as the "Fire Girl Collar Small" and should print well with as big as a 0.5 nozzle.
--
Updated 9/21/17 to fix a mesh error.
Updated 9/26/17 to add Iron Cross collar.
Category: Parts