HE280 Optional Light Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I picked up these super cheap LED hat lights are a popular superstore (Which I also work at) so I could hack them into…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 121
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I picked up these super cheap LED hat lights are a popular superstore (Which I also work at) so I could hack them into layer lights for my printer. Since the HE-280 upgrade, my old chassis-mounted lights no longer work due to the proximity to the wider fans, so having an effector-mounted light was a much better solution.
Couple spots of super glue on the PCB where the two angled tabs line up, then wire it to the "Optional light" tabs under the black cover.
Included a stock image showing the hat lights I hacked. Others may work better, but these work pretty well.
Category: 3D Printer Accessories