Muhle R89 Altoids insert

Couldn't find a suitable Altoids insert case for my safety razor, so I decided to model one, maybe it can be useful to you too :)

It comes in two versions, both w/ and w/o blade bank. I decided to do two versions because the bank may not be useful to everyone, and it is risky to print with a non perfectly tuned printer due to the steep angles (22.5 deg). Unfortunately there is no space to do it differently, as I don't like the need to take it out from the tin to use the bank. Should a blade get stuck in the bank, you can still pull it out from the tin and use the hole at the bottom. The blade bank version is untested, please write a comment with feedback if you print it.

It fits snugly into my tin from aliexpress, you'll need a bit of force to put it in, but it won't move.

Please note that the photo is from a prior version, I tuned it afterwards (slightly bigger blade storage and inset to keep the current blade in the head) but didn't bother to print it again as it was already pretty good.

Print without supports

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

0.2mm with variable layer height

Infill:

Filament:
[

](http://www.amazon.com/s?url=search-alias&field-keywords=Prusa+PLA&tag=thingiverse09-20)[ Prusa](https://www.amazon.com/3D-Printer-Prusa/s?k=3D+Printer+Prusa&linkCode=ll2&tag=thingiverse09-20&linkId=28c787aef7c5a20cf2004b821dd161bf&language=en_US&ref_=as_li_ss_tl) PLA Post-Printing

Finishing touches

Category: Organization