1 / 5
Whammy Bar Base - Left & Right-handed (Wii Les Paul / Guitar Hero) — zdjęcie 1
1 / 5

Whammy Bar Base - Left & Right-handed (Wii Les Paul / Guitar Hero)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement whammy bar base for Wii Les Paul guitars.

Ocena
0 / 5
Polubienia
20
Pobrania
283
Wydruki
0
Wyświetlenia
1168
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution

Drop-in replacement whammy bar base for Wii Les Paul guitars, in both left- and right-handed configurations. Matches the original design as closely as possible.

Printing

  • While PLA can probably be made to work, I recommend printing the base using a stronger material like PETG. My PLA builds broke rather easily during testing.
     
  • Using OrcaSlicer on a Bambu Lab X1C, I found printing with auto-orientation and auto-supports resulted in significant scarring on the exposed side of the base. To prevent this from happening, orient the base upright, with the larger travel stop facing downward. With supports added under the exterior overhangs, everything should come out nicely. For more details, see the included picture and screenshot.
     
  • On my most recent print, I used the following settings:

    • Preset: 0.2mm Strength
    • Sparse infill pattern: Gyroid
    • Wall generator: Arachne
    • Support type: Normal (manual)
    • Support style: Snug
    • Raft layers: 2 (to reduce scarring on the surface touching the build plate)
       

Retaining clip

If your original retaining clip for the whammy bar is no longer usable, search for an assorted e-clip kit. Here are a couple I've had success with: 
 

 

Change log

  • 2024-04-15: Slightly adjusted overall dimensions to eliminate rubbing against the guitar body.

 

Tagi