Bench Power Supply
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Based on a Dell ATX power supply. 5vdc and 12vdc plus buck/boost for any other voltages needed.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 674
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Based on a Dell ATX power supply. Breaks out the 5v and 12v rails to dedicated outputs. Uses the 12v rail to power a Buck/Boost regulator to provide any other voltages you need.
inspired by the multitude of other versions. Just wanted to make one that fit my needs and parts.
Bill of Materials
https://www.amazon.com/dp/B0BFCSK2J5?psc=1&ref=ppx_yo2ov_dt_b_product_details
https://www.amazon.com/dp/B072BY4XZ7?psc=1&ref=ppx_yo2ov_dt_b_product_details
https://www.amazon.com/dp/B00MEKVDEG?psc=1&ref=ppx_yo2ov_dt_b_product_details
https://www.amazon.com/gp/product/B0BWJHSLVK/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
¼ inch threaded rod
¼ inch nuts or acorn nuts
LED's (Blue and Green for me) with 330ohm resistors.
Various wire and crimp connectors.
You will need to follow one of the myriad guides on the net to modify your power supply. I am not responsible for you shocking the shit out of yourself.
I used a 4 place terminal strip to break out the voltages. I made 2 places for Ground and 1 each for the 5v and 12v busses.
This one was printed on a FLSun SR.
Material: Elegoo PLA+
Layer Height: .3mm
Infill: Gyroid
Supports: No (please orient the model so the face is down as I have gotten whiney baby comments about model orientation. )
Use what works best for you!