1 / 4
JDM to North America license plate holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
JDM to North America license plate holder that I made for my 1998 Honda Acty
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 120
- Wydruki
- 0
- Wyświetlenia
- 779
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
First time poster, first model upload!
I made this license plate adapter for my 1998 Honda Acty so the holes align with my Canadian plate. Stays perfectly hidden behind the licence plate.
M6x1.00mm threads are too tight as is, even with 0.08mm layer height. However, they properly guide a M6 tap and you will get buttery smooth threads after.
6 wall thickness to get a sturdier bracket and more meat to retap your holes
I used M6x8mm SS button screws for the plate.
Thanks!