1 / 10

Wind turbine savoniov helix - Remix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stuart800

@Stuart800_1278696

Beautiful helix vertical turbine, rotates very easily in the wind.

Ocena: 0 / 5
Polubienia: 25
Pobrania: 240
Wydruki: 0
Wyświetlenia: 2929
Oceny: 0

Aktualizacja u źródła: 20 sie 2026

Informacje o modelu

Źródło: Printables
Kategoria: Outdoor & Garden
Licencja: Creative Commons — Attribution — Noncommercial — Share Alike

Szczegóły Pliki (16)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (37)

Thanks to Lukass for the great wind turbine ...

After the blue wind turbine broke on the struts in a gust of wind, I reinforced the rotor. The reinforced version has also weathered storms.

For my installation situation I changed the bearing and added a hub for one ball bearing 8x16x4 688ZZ or 618/8ZZ. I just installed one ball bearing to make it easier to turn.

Assembly: Insert bearing into Nabe, turn nut onto threaded rod and insert small Distanz ring, insert Nabe with bearing facing down, then insert large Distanz ring and nut. Put the rotor on the hub and put on the SavKappe. SavoniovDach is required if a 4 mm rod is inserted at the end of the threaded rod for another wind turbine. NabeV3Eng fits more tightly. The Halter can be fitted onto a rod, and the Halter20xM8 can be attached to the Fuss20x5, the foot can be secured using a 5mm countersunk screw. The HalterH36xM8 allows the wind turbine to be bolted onto a horizontal pipe. The ReduzierungTPU accommodate various pipe diameters; two are required. M3 D5 L4 heat-set inserts (Voron style) for M3 socket head screws are heat-set into the HalterH36xM8Unten.

“Mini Airplane Wind Turbine” sits above my vertical wind turbine.

I printed all the wind turbines with PLA. I recommend brighter PLA up to 35°C air temperature. If it is warmer or if darker filament should be used, then use PETG or better ASA, if the printer is suitable for ASA.

I would also like to recommend my other wind turbines:

Illusion Windturbine MK2 counter-rotating

https://www.printables.com/de/model/895957-illusion-windturbine-mk2

Double rotor addon for wind turbine MK2

https://www.printables.com/de/model/887565-double-rotor-addon-for-wind-turbine-mk2

Double wind turbine MK3 counter rotating

https://www.printables.com/de/model/883528-double-wind-turbine-mk3-counter-rotating

Wind Turbine MK3 neo Remix

https://www.printables.com/de/model/882595-wind-turbine-mk3-neo-remix

Archimedes Wind Turbine Remix

https://www.printables.com/de/model/773350-archimedes-wind-turbine-remix

Ugrinsky Vertical Axis Wind Turbine Remix