"Toob" Demolisher Rocket Barrel for Adventure Force Ranger (Now with Mega XL!)

This barrel converts the Adventure Force Ranger into a Demolisher rocket launcher! Probably not the most practical one due to how chunky it is, but it is very fun and gets decent range as well!

The sight is styled after a grenade launcher leaf sight, it's mostly cosmetic but it does function, and can be used in the lowered position for a quick close range shot as well.

All files are oriented correctly, I recommend printing all parts with 3 walls to make some thin parts solid and make the barrel more sturdy in general. Infill is up to you, I went with 10% Gyroid. You may need a brim for extra adhesion (especially on the sight base), if so I recommend using outer brim only. 

I printed mine using Bambu Basic PLA Orange, using 3 walls PLA is plenty strong enough for this mod.

No supports necessary but do make sure your printer can handle some small bridging for the front sight.

The barrel prints in one part and replaces the original. The rear sight is made up of two parts, the sight leaf is secured into the base using a single M3x20mm screw.

I have also included a version of the barrel without the sight, if you wish to use a rail adapter instead (or simply use no sight at all.)

Enjoy!

[Update 04/22/2024: Added a Mega XL variant. Has the same outer diameter/appearance but with a Mega XL sized internal barrel. All print settings should be the same.]