Low-poly Chikorita Flowerpot and Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed low-poly Chikorita pot: no supports, no steep overhangs, optional drainage, includes tray.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A friend asked me to print them a Chikorita flower pot, and I liked the low-poly version I found but the interior had many steep overhangs that made it unsuitable for FDM printing without the use of internal supports. I remixed that design by filling in the interior and hollowing it back out without overhangs greater than 45º, and also added a water drainage hole and designed a tray for it to sit in.
There are versions of the pot with and without a drainage hole, as well as an STL with the pot and tray combined.
Print Settings
Printer Brand:
AnkerMake
Printer:
AnkerMake M5
Rafts:
No
Supports:
No
Resolution:
.3mm
Infill:
10% Support Cubic
Filament:
Protopasta Ecto Ooze Green HTPLA
How I Designed This
Internal Cross-section View
No supports are needed, as the overhangs are all 45º or less and the drainage hole has a triangle-shaped profile.
Category: Household