1 / 2
Dividers for Stanley/Craftsman small parts organizer drawers — zdjęcie 1
1 / 2

Dividers for Stanley/Craftsman small parts organizer drawers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stanley drawer dividers that actually stay in place :)

Ocena
5 / 5
Polubienia
59
Pobrania
297
Wydruki
9
Wyświetlenia
1030
Oceny
11

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Two different dividers for the small drawers of this STANLEY organzier: https://www.stanleyworks.de/produkt/1-93-980/kleinteilemagazin-mit-30-schubladen (model 1-93-980), also sometimes branded as CRAFTSMAN . 

These lock in place (you can pick up the drawer by the dividers!) by having tiny nubs at the bottom that slot below the tabs on the rails, plus thickened sides that add friction inside the rails.

I printed them with a 0.4 mm nozzle and 0.2 mm layer height in PETG and PLA, standing upright with a brim.

Tagi