NuRecover Sauna Humidity Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Put a round humidity gauge in your sauna tent
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution
This simply clicks onto the PVC pipe that supports my NuRecover sauna tent. It uses the large diameter connection point to prevent it from sliding down. This puts it at about the perfect height when you're sitting in the provided chair.
I recommend printing in PETG not just for the temperature resistance but for the slight bit of flexibility to snap it onto the PVC pipe.
Print in the provided orientation. No supports are needed as long as your printer is decent at bridging. Even it its not, the ugly part will be covered by the humidity gauge anyway.
Here is a link to the gauges I use. https://www.aliexpress.us/item/3256802192345934.html?spm=a2g0o.order_list.order_list_main.5.74671802llmMtY&gatewayAdapt=glo2usa