Star Wars Unlimited: Epic Action Token (double sided)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a double sided token used to represent if an epic action has been taken yet in Star Wars Unlimited.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 378
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I created this model to be used when playing Star Wars Unlimited. This token is used mark when leaders or based have used their epic action (orange N side) or have it available (green Y side). This token has a Y side and N side written in written in Aurebesh. This token is designed to be printed with 3 colors using filament swaps. Note, in the photo the Aurebesh letters are reversed, but the models are correct.
Recommended Print Settings
Note: All of these print settings are attached in the 3mf file called “epic_action_token_settings.3mf”.
- Material: PLA
- Supports: None
- Brim: 3mm (my testing I had warping without a brim)
- Layer Height: 0.1mm (this gives better results with the filament swap)
- Filament Swap Layers:
- Print in green until 0.8mm
- Print in white from 0.8mm until 2.4mm
- Print in orange for the remainder
Be sure and check out my other SWU models.