Welding Lens adapter for GoPro Hero 12
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter will hold a 51mm x 108/109mm "Welding Lens" in front of a GoPro Hero 12.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 603
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This adapter allows you to mount a 51x109mm welding lens to a GoPro Hero 12. Tested on the Bossweld ones from Bunnings, but should also work on any similar sized welding lenses.
It holds the GoPro lens nicely centred in the welding lens for a clear picture, and still lets you see the front display on the GoPro (though dim) to check your shots if needed. The adapter just sits loosely on top of the GoPro protecting it on front/top and partially on the sides, while still being easily removable with no clips/attachments so you can take it on/off with gloves if needed (to clean lens or change GoPro battery).
I recommend printing it “upright” (as per screenshot of it sliced), with organic supports and a brim to help with adhesion. It's slower than printing it in other directions but it makes it easier to post-process and lets the lens slide in easier later.
The .3MF file and .gcode are already sliced like this. Use the STL if you want to slice it in a different way.
After printing, I sprayed mine with primer and then a few coats of BBQ black fire-proof paint, just so it lasts longer.