Nespresso coffee pad dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A drawer system I designed for easy coffee pad dispensing. I designed this for our canteen at work. I printed only four
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 258
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
Print Settings
- Printer brand:
Ultimaker
- Printer:
Ultimaker 3 Extended
- Supports:
Yes
- Infill:
10%
Post-Printing
Does need some finishing, the pins go in the hole that are in the drawer, but only after the drawer is placed in the base, the two pins are there to keer the drawer from falling out the base when pulled to hard.
the link bit is used to connect the left stand to the last base.
How I Designed This
I used Sketchup to draw this up, about halfway through the project I was told not to use ketchup and I could better switch to Autodesk Fusion. I had e swished to Autodesk for my new designs, this one is finished in Sketchup.