Worker Nightingale Picatinny Rail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A short Picatinny rail designed to fit the top of the Worker Nightingale.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 102
- Wydruki
- 1
- Wyświetlenia
- 587
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a picatinny rail sized specifically to fit the Worker Nightingale (Nerf blaster). It mounts to the two screw inserts on the top of the blaster and allows for the attachment of a whole variety of accessories, including optics, lights, accessory mounts, and other many more. Plus it looks really cool. :)
No supports needed, unless your printer has trouble with very mild overhang. I went with 20% gyroid infill, but I think you could get by with 10% or 15%. Takes M3 screws. Works with 6mm and 8mm length screws. Going longer is a problem for the rear screw insert, as the screw passes completely through the body and will obstruct the pusher.