Starlink roof rack mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Starlink dishy antenna mount for roof rack.
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 238
- Wydruki
- 0
- Wyświetlenia
- 1170
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
I've designed this to mount the Starlink antenna on my Front Runner Slimline II Roof Rack. But it should also work for other roof racks and flat surfaces.
The mount includes the key and latch necessary so that the antenna locks in place.
If you need to change the hole number and position, I've provided the Fusion 360 project files. The design is parametric, so there're a lot of variables you can play with to adjust for your requirements and print tolerances.
For my test print, I used PLA with 5% in-fill, and 0.30 layer height. For my final print, I will probably use ColorFab HT to ensure that it doesn't melt during hot summer days.
NOTE: The design is released using the CC attribution non-commercial license. So you're not allowed to sell the design, nor prints of the design.