A2212 Motor Mount for Chassis 1/10 Adaptable - DKS-Basic by Duke Doks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Aliexpress is taking it's time with my motor and I had a spare A2212 motor lying around.
- Ocena
- 0 / 5
- Polubienia
- 63
- Pobrania
- 294
- Wydruki
- 1
- Wyświetlenia
- 2810
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Update 2024-05-25 - [rear-axis - A2212]: Moved the screw hole on the axle by 1.75mm instead of .8mm to have more space between the motor screws and the gear.
Update 2024-05-26 - [rear-axis may2024 update - a2212]: The original rear-axis got updated to include nuts and different wheel-adapters. I added the new axis with the adjusted screw hole.
To use this you have to modify your motor. Remove the e-clip and the grub screw holding the motor shaft. Pull the motor apart and push the shaft all the way through. You could also turn the shaft around with the e-clip on the other side but I just dremel'ed a flat spot on each end of the shaft, one for the grub screw and one for the pinion.
rear-axis - A2212 is kinda optional since I only moved the screw hole by 0.8mm to align the gears. This remix works without the modified axis but the gears don't align fully.