Black & Decker 40V max battery holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After making a battery holder my 20 volts batteries, I figured i could make one for the 40 volts as well.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 112
- Wydruki
- 0
- Wyświetlenia
- 378
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Made this Black & Decker 40 volts max battery holder so i can easily store them and so they can stay at reach.
I made these models based on the 40 volts max battery that came with my Black & Decker battery powered tools. The battery part# is LBX1540.
I have made 2 models, a single battery holder and a double battery holder.
Printing settings:
There’s no specific print settings other than to print them flat on the bed, like shown on the pictures. No support needed that way.
I have printed mine using True Black PLA from HatchBox. Ive used 4 top and bottom layers, 15% gyroïd infill, and a 0.3 layer height. You can still adjust those to your liking.
I didn't try to print it with PETG that could be stronger and have less tendency to crack.
Other version:
I have also made a battery holder for the 20V battery from Black & Decker.
https://www.printables.com/model/845219-black-decker-20v-battery-holder