Karrimor Pannier Clips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple clips for holding Karrimor panniers to bicycle luggage rack.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 315
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
General Description
Clips I designed for Karrimor panniers which were missing (my first 3d printed part 😊). They work best for a luggage rack with circa 10.5mm frame tube diameter (probably 10mm + paint) (designed for a tour de suisse bycicle). Works for pictured pannier-clip system, third picture shows the dimensions.
A M4 threaded insert can be put in the hole so the clip can be secured to the pannier with a screw. It whould probably also work without this screw…
Printing
Because outdoor use, i printed it with PETG. I used 0.16mm layer height and 60% infill. Non beginners like me may find better print setting…