Prusa MK4 Z-axis mounts for IKEA SKYDRAG/SILVERGLANS light bar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Z-axis top parts which are extended for connecting an IKEA Skydrag/Silverglans light bar.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 1013
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Replacement (and possibly upgrade to R3 version) Z top-mounts for the Prusa MK4 printer with extensions to mount an IKEA Silverglans/Skydrag 16"/40cm light bar. (Tested with Silverglans; IKEA number 305.286.70). The Skydrag/Silverglans mount is swivelable.
Note: The studs for mounting the light should be shortened by ~0.8mm at the base on both sides so that it fits flush and also eliminates slight side strain on the extension. Current version works well enough so I don't want to print another version to test it.
(The IKEA lights run on 24VDC same as the MK4 ;) … after chopping off the plug, white wire is +, black is -)