Rotatable Interlocking Mobius Rings Wall Art
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3 mobius rings that do not touch each other but do interlock so they can not be taken apart on a spinning backdrop
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 345
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Share Alike
I made this wall art for the 113th community contest. The Mobius ring was always intriguing to me and with some modeling, I made three separate rings that interlock into each other, creating a mesmerizing movement when you add some spin to it.
The wall mount uses two standard bearings with an inner diameter of 8mm and an outer diameter of 22 mm for a smoother rotation.
The backwall is two parts because that is the maximum size mu printer can print :(
Small layer height is recommended and PVA for support as well. The small orange dots are from the remaining support material that was too difficult to remove.